Latest price:US$3,350.00€3,252.52£2,701.78AU$5,510.75C$4,999.88US$2,788.00€2,706.87£2,248.52AU$4,586.26C$4,161.0917% off
Item No. SZ-SK395-2
Free Shipping
Autel IM608 II 2 Years Free Update Version improved firmware, Android 10, larger RAM, ROM, with new JVCI+ VCI. Add bulit-in DoIP and CAN FD protocol (don’t need converter) Support remote expert function
Programming a New Key for a 2018 Toyota RAV4 Using Autel IM608 II
If you have lost all the keys to your 2018 Toyota RAV4 with keyed ignition, follow these steps to program a new key with Autel IM608 II. This process is applicable for vehicles in the Middle East and USA.
Steps to Program a New Key
Setup the Autel IM608 II
Connect the Autel IM608 II to the vehicle’s OBD-II port.
Navigate to the IMMO function on the device.
Agree to the Terms and Conditions.
Vehicle Selection
Select Toyota from the list of manufacturers.
Choose Automatic selection to read the vehicle information.
Confirm the vehicle information and click OK.
Access the Control Unit
Select the Control unit option.
Choose Immobilizer (H 8A/8E).
Immobilizer Reset (All Keys Lost)
Select Immobilizer reset (all keys lost).
Ensure the vehicle’s door remains open during the learning process.
Key Registration
The device will prompt you to enter the number of keys you want to register. Enter 1.
Follow the instructions on the screen:
Turn the ignition off.
Turn the ignition on.
Turn the ignition off and remove the key.
Turn the ignition on.
Turn the ignition off and remove the key.
Master Key Learning
The Autel IM608 Pro2 will prompt you to learn 1 master key within 120 seconds.
Insert the master key and turn the ignition on. Wait for 5 seconds.
Quickly turn the ignition on and off 5 times until the SECURITY lamp goes out, indicating that the learning process is complete.
Final Steps
Verify the number of master keys programmed (should be 1).
Test the new key to ensure it works properly.
Completion
The process is now complete, and the new key should be successfully programmed.
